Display per page
Scott Safety

Scott Safety PF251/2 Filter Cartridges for Tornado Respiratory System

High efficiency particulate filters for use with Tornado powered respirators

Easy to mount

Maintenance free

Conform to: EN12941/2

Supplied in boxes of 20 cartridges



3M Peel Off Visor for 3M HT-402 Respiratory Helmet

3M Removable / Peel Off protective film for 3M HT-400 Visor with QSR coupling and 3M vision headgear.

Easy to apply with two self-adesive strips.

Easy to peel off by the side tab.

The Visor Cover fits over the standard visor and protects it from scratching or overspray of paint and chemicals.

This will extend the lifetime of your 3M visor.

3M 4002226-OP made to fit for all HT-400 series with QSR coupling and 3M vision headgear.



Honeywell 1001781Spare Fabric cassette DTVS-1510/5 for Airvisor Kits

Replacement fabric cassette DTVS-1510/5 for Airvisor kits

Not suitable for new Airvisor 2 kits.

Pack of 5



Honeywell 1001675 Airvisor Air Supply Tube

Air Supply Tube with Diffuser DAVS-1407

Replacement DAVS-1407 air tube and diffuser for the Sperian by Honeywell Airvisor AVK-0012, DMAK-0201, DMAK-0202, DMAK-0203.


3M 6885/07142(AAD) Faceshield Cover Respiratory Protection (Pack of 100) Quick View
Hurry low stock

3M 6885/07142(AAD) Faceshield Cover Respiratory Protection

The 3M 6885 is a disposable lens cover for the 3M 6000 series full face respirators.

Made of crystal clear mylar, it attaches to the lens with peel off adhesive tabs on each end.

Useful in protecting the relatively expensive lens from scratches or overspray from painting.

When you feel that the lens cover is used up, it may be peeled off and disposed of.

Putting a fresh cover on will keep your lens clean and clear.



3M Filters A2P3 for Jupiter Turbo Unit (Pair)

The 3M A2P3 Jupiter filters, for use with all 22 of the different headtops within the powered 3M respirator range.

It's very Easy to Fit to Jupiter Turbo Unit.

3M 453-00-25P2 conforms to EN 12941 TH2.



3M 453-09-25P2X6 Combination Filters A2BEK1P for Use with 3M Jupiter Turbo Unit

Genuine 3M Filters - Easy to Fit to Jupiter Turbo Unit - Approved to EN12941 class.

(A2) organic gases and vapours with a boiling point above 65C

(B) inorganic gases and vapours.

(E) acid gases.

(K1) ammonia and its derivatives.

(P3) particulates.

One Pair



3M 5925 P2 Particulate Filters Pads for 6000 & 7000 Series Dust Masks

The 3M particulate filter 5925, can be used in industries where excess levels of particulates are present.

3M Particulate Filter offering P2 R protection against solid and liquid particles.

Designed for use in combination with 3M Gas and Vapour Filters 6000 Series using the 3M Filter Retainer 501 or used separately using a 3M 603 Filter Platform and a 3M Filter Retainer 501.

Particulate filter can be used in conjunction with 6000 Series Cartridge Filters

These filters are versatile, compatible with 6000, 7000 & 7500 series.

Filters can be used on all 3M Half and Full Face Masks fitted with a bayonet connections system.

3M 5925 P2 Particulate Filters conforms to EN 143:2001 Safety Standard.

Price per pair.



Portwest PS90 Faceshield Clear Visor

Arc Flash Protection Class 1

It provides the maximum light transmittance and "improved colour recognition" as per EN 170.

This visor consists of a face shield with a bracket for slotted caps.



Portwest PS91 Faceshield Visor Arc Flash Protection

PS91 Arc Flash Visor Class 2 is arc protection Class 2 and VLT Class 1 product.

It exceeds the highest arc flash protection according to GS-ET-29 and E DIN 58118 and is designed to maximise colour perception and visible light transmittance.

It has a universal slot adapter for hard hats, a large permanently attached chin protector and a light green moulded injected visor with anti-fog coating.


3M 008-00-42P3 Light Weight Breathing Tube Polyurethane Quick Release Bayonet, 3 Pack Quick View
Hurry low stock

3M 008-00-42P3 Polyurethane Quick Release Bayonet Light Weight Breathing Tube

3M 008-00-42P3 Light Weight Breathing Tube.

Tube made from Polyurethane with Quick Release Bayonet.

Polyurethane breathing tube for respirators Versaflo & Jupiter.

It is extremely easy to attach and detach.

In addition it swivels to avoid loops and kinks in the hose.



3M 462-05-00P10 Dustmaster PAPR Systems Pre Filters

This Pre Filters is a component that fits into the 3M Dustmaster powered air purifying respirator (PAPR) Systems.

Pre Filters helps filter contaminants before they reach the filter.

Suitable for construction, welding, manufacturing, food processing and woodworking applications.

Pack of 10



3M 6059 ABEK1 Gas & Vapour Filter 1 Pair

Provides exceptional protection against gasses and organic vapours.

Compatible with 3M 6000 and 7000 series half & full face mask products.

Very simple setup process, also easy to remove.

Conforms to EN 14387:2004 Safety Standard.


3M 6055 A2 Organic Vapour Filter (8 Pack) Quick View
Hurry low stock

3M A2 Organic Vapour Filter 6055

The 3M Vapour and Gas Cartridge 6055, protect against organic vapours.

Suitable for 3M 7000 and 3M 6000 Series Half and Full Face Masks.

Typical industrial applications are anywhere conventional paints are used: Aircraft manufacture, Ink and dye manufacturer, Paint and varnish manufacturer, Resin manufacturer or Vehicle manufacture.

3M A2 Organic Vapour Filter 6055 conforms to EN14387:2004 + A1:2008

Carton size: 8 Cartridges (4 Pairs)


3M Versaflo TR-3710E Particulate Filter P3 Quick View
Hurry low stock

3M Versaflo TR-3710E Particulate Filter P3

Very simple setup, the filter can be easily changed and by hand.

Conforms to EN12941 Safety Standard.

The TR-3710E is a high efficiency particulate (P3) filter for use with the 3M Versaflo Powered Air Purifying Respirator (PAPR), Series TR-300 Series.



3M Versaflo TR-3600 Pre-Filters

3M Prefilter TR-3600, for Versaflo TR-300 PAPR.

Disposable pre-filter that extends the service life of the main filter by minimising particulate entering the main unit.

When installed inside the filter cover of a TR-300 PAPR, the TR-3600 prefilter can extend the life of the HE filter by capturing large particles that would otherwise clog the HE filter.

Supplied in pack of 10.



3M Pre-Filters Pads for 3M Jupiter Turbo Unit

461-00-02P24 Pre-Filters to be used for 3M Jupiter Turbo Unit.

A Pre Filter can extend the life of the Powered Air Respirator.

Pre-Filters Pads capturing large particles that would otherwise clog the filter.

Pack of 12 Pairs of Pre-Filters



3M 501 Filter Retainers (Pair)

Used for clamping particle pre-filters onto vapur and gas filters.

Compatible with 3M 5000 Series respirator, 6000 series cartridges & 3M 603 Filter adapter.

Measures 10.2cm (high) x 21.5cm (Long) x 11.4cm (Wide).

CE Approved.



3M Breath Tube Cover QRS

3M quality Breath Tube Cover for respiratory systems.

You can extend the service life of the breathing tube by using a QRS tube cover.

Single Cover



3M Versaflo Male Rectus Fitting 5301252P3

3M Versaflo rectus plug belt unit coupling quarter inch BSP male thread for powered respiratory system.


Was £41.69
3M BLT-15 Belt Clip For Jupiter Powered Air Respirator


Was £18.62

3M 060-23-06P Airstream P2 Filter Pack of 10

Main filter for the 3M Airstream Helmet

Main P2 filter for the 3M Airstream Helmet

The class P2 respiratory protection filter works against solid and liquid particles.

For use with the 3M Airstream Powered Air Respirator AS-300

Genuine 3M Accessory

Supplied in packs of 10 filters



Decontamination Comfort Belt.

For 3M Versaflo


Moldex 8200 ABE1 Organic Inorganic Gas \ Acid Gases Cartridge Filter - 5 Pairs Quick View
Hurry low stock

Moldex 8200 A1B1E1 Organic Inorganic Gas and Acid Gas Filter

These 8200 A1B1E1 filters from Moldex are compatible with the Moldex 8000 series half mask.

This filter has a unique pleated filter which reduces fatigue, improves wearer comfort.

Moldex 8200 ABE1 gas filter cartridges protect against organic, inorganic and acid gases and vapours.

Moldex 8200 A1B1E1 Organic, Inorganic Gas Filters conforms to EN14387: 2004 + A1: 2008.

Pack of 5 Pairs.



Portwest P971 ABEK1P3 Combination Filter Cartridges

This anti-gas and anti-particles filter protects from organic and inorganic acid gases and vapours, sulphur dioxide, ammonia and its derivatives.

Classified as a class 1 filter for gases and class 3 for particles, it can be used to protect against harmful substances, solvents, toxic particles and micro-organisms.

The special Portwest bayonet system ensures a safer connection between the mask and the filter.

This filter is compatible with half masks P420, P430 and Full Face masks model P500.


Display per page

Filters and Accessories

Filters and Respirator accessories.

Your respirator will need different types of replacement filters, cartridges, feed lines and other accessories to ensure safety work environment.

It is huge responsibility to determine which filter, cartridge, or canister is necessary and how often it needs to be changed.

A gas detection monitor can help you determine which gases are present.

We can help you to get right protection: just contact us on sales@northseaworkwear.com

Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox