Display per page
Display
Tranemo

ID 0850 Mens Knit Fleece Work Cardigan Full Zip Melange Contrast Patches

Smart knit fleece cardigan in melange coloured yarn with contrasting patches.

Two-way full-length zipper

Adjustable cord at the bottom

Two side pockets and one chest pocket, all with quality zipper

Fabric: 100% Polyester 300g/m²

Machine washable 40ºC

ID 0850 Knit Fleece Cardigan Full Zip Melange available in size LARGE only

PFL197PC-L

Was £57.89
£45.23
Orbit International

Orbit Midcut WB5 Black PU 900 Rubber Boot

Steel Toe Cap S3 Safety Water Resistant Antistatic Work Shoes

Excellent boot that is tough, durable and lightweight, this boot adapts to any terrain.

Made from a Nu Buck water resistant upper.

Safety protection is given via a lightweight steel toe cap & midsole.

Padded ankle and tongue give added support around the foot.

Orbit Midcut WB5 Black PU 900 Rubber Boot complies with EN 345-S3 safety standards.

ST306B

Was £31.4
£27.54
Goliath

Goliath Public YDS USTM1312 Public Order Control Boots

Control black public order NFSR1111 boot from Goliath.

Black Boots made of tough and durable full grain leather and cut resistant material around the sides and the vamp area.

Flame and heat Dual Density Rubber injected sole to 300°C, SRC slip resistance rating.

More protection with thermoplastic ankle casing for ankle support.

Water resistant, flame retardant and breathable full grain cow hide leather.

Highly breathable, sweat absorbant Inner Linning made with abrasion resistant knitted fabric to keep the wearer dry and comfortable.

YDS Initiator USTM1312 GORE-TEX 2.0 boots meets public order footwear standards: EN ISO 20347:2012 - O2, FO, HI, CI, HRO, WR, SRC.

Goliath Public YDS USTM1312 boots available in Size UK-11 Only.

PBT14PO-11

Was £125.38
£106.25
Magnum

Magnum Pro Bunker Fireman Unisex Boot

Magnum Pro Bunker Fireman Unisex Boots with Fire Retardant Leather.

Sympatex® membrane which is fully Waterproof & Highly Breathable.

Outlast® Adaptive Comfort Certified Space Technology regulates the temperature inside the boot for maximum wearer comfort.

Toecap & Penetration Resistant Plate - Fully meets all safety footwear Requirements and provides excellent all-round protection.

Otholite® footbed: to give long lasting comfort and support.

Conform to: EN 15090:2006 Class 1/Type 2 F2IS CI SRA - EN 13287 SRA HI 3.

ST1030

Was £112.03
£92.59
Cofra

Cofra Shield Chainsaw Protective Safety Boot

High S3 safety forestry shoe from Cofra.

Made from Highly smooth, full-grain cowl leather.

Oil resistant PU \ Nitrile sole, heat resistant outer sole up to 300C for 1 minute contact.

Shock Absorbent heel, extremely rugged sole suitable for outdoor work.

Full FELTEC, antistatic, anatomic Footbed, made of felt.

Cofra Shield safety boots are equipped with Kevlar saw protection.

Comparing to the size, it is extremely light chainsaw protective boots.

Provided with steel Toe Cap, confirms to EN 345-1 S3 HRO safety standards.

EN 381-3 Standard, Chainsaw protection class: 2 - Chain Speed 24 (meters per second).

ST799

Was £79.51
£64.64
Shoes for Crews

Shoes for Crews Icon 5091 Safety Shoe

Everything a work boot should be: safe, tough and comfortable.

Every detail was considered in this full-grain leather boot: padded collar and tongue, removable, leather-lined, cushioned insoles and raised exterior ridges on the arch for additional grip.

This work boot features our patented SFC Mighty Grip outsole and meets approved EN 20345 standards.

Non-metallic polycarbonate safety toe, textured reinforced toe for extra protection and greater durability.

Its inner lining helps keep feet dry.

SFC 5-GRIP Slip-Resistant Outsole.

Shoes for Crews Icon Shoe 5091 conforms to: EN 20345 S2 safety standards.

ST4933

Was £84.75
£67.80
V12

VTech E3570 Endura Steel Toe Cap & Midsole S3 Work Mens Safety Boots

Specifically designed for rough working environments this boot combines extreme durability with lightweight, comfort for all day.

Extremely durable, breathable and abrasion resistant, water resistant leather Upper.

Pre-formed, shock absorbing, breathable and abrasion resistant Foot-bed.

Resistant to impact of 200 Joules Toe-Cap with wide fitting steel coated for corrosion resistance.

Protective Midsole made from Flexible powder coated steel, resistant to 1,100 Newton.

Bellowed tongue will keep dust and debris from entering the boot.

Rubber bump cap toe and heel reinforcement for extra protection and duration.

Anti-static, Heat resistant to 300°C PU rubber outsole.

Dual Density PU/Rubber sole: exceptional abrasion resistance and ideal for environments where oils and solvents are used. Heat resistant to 300°C contact.

VTech E3570 Endura Safety Boots conform to: EN ISO 20345 S3 SRC safety standards.

A080103020

Was £62.55
£46.68
Timberland

Timberland 6201027 Safety Hiker Boots

Premium full grain nubuck leather upper

Water resistant

Toe cap features flexible reinforcements

Minimum stitching on the upper

Reinforced ankle padding

Internal mesh lining

Plastic lace holder reinforcements

Soft pre-moulded antibacterial, antistatic & removable foot bed

Anti-puncture steel midsole

Midsole featuring shock absorption EVA

Cemented sole construction & BSFP high traction design nitrile rubber outsole

ST990

Was £112.71
£95.52
Beeswift

Beeswift TBBR Traxion Brown Safety Work Boot

Designed to provide superior protection and comfort to the user throughout the work day.

Very lightweight construction allowing the user to move freely and with ease.

The 200 Joule steel toe cap does a great job of protecting the user from all sorts of impacts.

Lined with breathable water resistant materials making these boots ideal for outdoor work.

Beeswift TBBR Traxion Brown Safety Work Boot conforms to EN ISO 20345:2011 S3 SRC Safety Standards.

ST724

Was £56.15
£47.99
Cofra
Cofra FRIBURG INTER-MET S3 M HI CI HRO SRC Safety Boots - Size 8UK Quick View
Hurry – low stock

Cofra FRIBURG INTER-MET S3 SRC Safety Boots

Water repellent full grain leather Upper, with internal metatarsal protection.

Breathable synthetic External Lining and SANY-DRY internal Lining.

Abrasion resistant, 100% polyester fabric SANY-DRY internal Lining is breathable, antibacterial and also absorbs and releases the moisture.

EVANIT Footbed is made of EVA and nitrile special compound, variable thickness (12mm - 8mm - 3,8mm).

Non metallic TOP RETURN safety Toe Cap resistant to 200 J.

Non metallic APT PLATE - Zero Perforation Midsole protection.

Stitched, fully made of nitrile rubber resistant to +300 C Sole (Resistant to +300C Heat for 1 minute contact).

Cofra FRIBURG INTER-MET S3 SRC Safety Boots conforms to: EN ISO 20345:2011 S3 M HI CI HRO SRC safety standards.

ST1399-42

£61.66
Cofra

Cofra New Storm Safety Boots S3

Gore-Tex, Membrane protects against bacteria and results high temperatures.

Full piece footbed is made of felt, antistatic material, absorbs moisture.

The PORON insert in the heel region absorbs the impact shock on the spinal column.

Cofra guaranteed hygiene by the fabric lining which keep the foot dry absorbing and releasing moisture.

ST714-6

Was £85.67
£71.99
Dr Martens

Dr Martens FS20Z Air-Wair Steel Toe cap Lace-Up Boot

FS20 is from the ever -popular Dr Martens ‘Air-Wair' range of safety footwear.

It is a low- cut, 4 eyelet safety ankle boot.

It has the classic DM yellow stitched welt, ‘Air Wair' sole.

It has a padded collar for extra comfort and support.

This boot has a steel toe cap for safety in the work place.

The trademark Docs P.V.C. sole cushions your feet, as well as giving excellent slip resistant properties.

Dr Martens FS20Z Lace-Up Safety Boot conforms to: EN ISO20345 Safety Category SB. E+SRA safety standards.

ST446A

Was £112.95
£89.64
Wenaas

Wenaas 72-853 Forma Thunder Steel Toe Cap S3 WRU Work Mens Safety Boots

Lace boots with steel toe cap and with upper part made of full grain leather.

Thinsulate & Ori-Tex membrane and a 3M Thinsulate lining to keep you warm and dry.

TPU/PU sole with L protection including nail protection.

Industrial work boot with high quality full grain leather upper.

Speed Lace-Up system.

Padded collar and tongue for a firm fit and added comfort.

Scuff Cap for extended protection and durability.

Reinforced heel support, Steel Toe Cap Protection and Kevlar Midsole Plate.

Wenaas 72-853 Forma Thunder safety boots conform to standards: EN ISO 20345, S3, WRU.

A086F05023

Was £61.55
£53.99
Wenaas

Wenaas Forma Rainmaster Gore-tex Water Resistant S3 Safety Boot

This is made using the highest quality, premium, water resistant full grain leather with cordura textile.

Abrasion resistant.

Light aluminium toe cap (50% lighter than steel).

Double density TPU/PU sole.

The outer layer of the sole is TPU with high physical and mechanical properties.

The upper layer is soft expanded PU with resilient properties that emphasize the shock absorption capacity of the material.

Heat resistance = 120 Deg C.

Gel insert penetrating the mid-sole in the heel, absorbs the impact shock deriving from the foot movement.

Non metallic L-protection midsole.

GORE-TEX 4 layer GORE-TEX® membrane contains 1.4 billion of pores per square cm, big enough for moisture vapour to escape, but too small for wind, rain and snow to penetrate.

GORE-TEX is therefore wind and water proof and simultaneously they have breathing capacity.

A086F05084

Was £114.23
£95.99
Jolly

Jolly 9005-GA Fireman Goretex Fireproof Pull On Boot

Firefighter boots are made using full grain leather with water-repellent treatement - rubber toecap cover - rear gusset - innovative elastic system for perfect fit - rear pull-on loop - ankle protection.

GORE-TEX® Lining - Performance Comfort Footwear, excellent for various climate conditions and for outdoor activities.

Innovative laminate composite Insole made using antiperforation materials.

Antistatic nitrile rubber Sole, heat and fuel oil resistant, non-slip, wear-resistant, shock absorbing heel.

Extremely light aluminium Safety ToeCap resistant to 200 joules.

ST334

Was £186.3
£162.00
Jolly

Jolly 9055/GA Firefighter & Chainsaw Waterproof Boots GORE-TEX

Jolly chain saw boot composed of cut resistant, light weight, ankle protection, high visiblity and heat insulation.

GoreTex waterproof & breathable. Excellent for various climate conditions and for outdoor activities.

Lightweight and comfortable

Ankle protection and abrasion-resistant rubber overcap

Good stability both for walking and running

Total opening zipper easy and fast to clean

High quality materials for a long lasting boot

High visibility PPE thanks to the red reflecting insert

Padded rear flexors for an increased fitting comfort

Rear leather pull-on loop

Extremely comfortable for long-day usage (breathability is 400% better than EN20345 5.4.6 standard requirement)

The heat insulation (sandbath test) is 30% higher than EN15090 6.3.1 standard requirements

Excellent grip on uneven grounds (the outsole is 40% more durable than EN20345 5.8.3 standard requirement)

The sole bonding strength is 90% higher than EN20345 5.3.1.2 standard requirements

The energy absorption in the heel area is 90% higher than EN20345 6.2.4 standard requirements

Outsole resistant to fuel oil

Lining: GORE-TEX® Performance Comfort footwear, excellent for various climate conditions and for outdoor activities


Conforms to: EN 15090 (firefighter footwear):2006 F2A HI, CI AN - SRC and EN ISO 17249:2004 Class 2 Category III PPE (chainsaw boots) and EN20345

ST341

Was £213.83
£190.92
Wenaas

Wenaas Forma Athlete Metal-Free Safety Midsole & Toe Cap Safety Trainer

Lightweight and agile, Metal-Free Forma Athlete Safety Trainers.

The leather upper is made with a technical microfiber and cordura fabric.

The shoe has non-metallic, soft nail protection and composite toe cap.

Ideal safety trainer for working in industries where metal free footwear is needed.

Wenaas Forma Athlete Metal-Free Safety Trainer complies to EN20345 S3 safety standards.

A086F05013

Was £49.2
£42.78
Uvex

Uvex 1 X-Tended 8511 Safety Trainer Shoe Metal-Free ESD Black

The manmade sole is lightweight and provides exceptional grip and protection.

The lace-up closure system provides a secure and comfortable fit for the user.

100% metal-free construction making these shoes even lighter improving the users dexterity at work.

Manufactured with breathable materials improving the users overall experience and comfort.

Meets ESD requirements making these shoes ideal for electricians.

Conforms to EN ISO 20345 Safety Standards.

ST1151

Was £87.88
£77.09
V12

V12 Lynx Low Cut Metal Free Rigger Metal Free S3 Safety Boot

V12 Lynx Low Cut Metal Free Rigger S3 Safety Boot is made from a full grain supple cow hide water repellent upper.

Composite toe cap and midsole offers excellent protection that is also lightweight.

This boot is metal free making it very light on your feet, especially if its worn for long periods of time during the day.

It includes durable pull on loops, pneumatic back for comfort when flexing or walking.

Twin shock absorbing footbed is shaped to support and support the foot.

Complies to EN ISO 20345:2011 S3 HRO SRC safety standards.

VR696

Was £81.3
£68.32
Cofra

Cofra Flint Non Metallic Safety Boot

Non-metallic toe cap resistant to 200 J and non-metallic midsole with Zero Perforation.

Cofra Flint Non Metallic Boot footbed made of soft and scented polyurethane, anatomic and antistatic, holed, covered with cloth.

There is a soft gel insert in the metatarsal area guarantees stability and comfort even on uneven surfaces.

Made from abrasion resistant 100% polyamide fabric, breathable, it absorbs and releases the moisture.

Cold protection thanks to thinsulate B200 lining.

Cofra Flint Non Metallic Safety Boot complies to EN ISO 20345:2011 S3 CI HRO SRC.

ST758

Was £74.4
£63.59
Amblers

Classic Amblers FS237 Smart Style Black Safety Shoe

This style of shoe was an original safety shoe - the PVC cushion sole makes for great walking comfort and ideal for industrial office use.

Classic gibson-style shoes crafted with a smooth mono-black leather upper gives a more formal look.

Safety shoes comes with full 200 joules protection in the steel toe cap.

Amblers FS237 Classic Safety Shoe conforms to EN ISO20345 SB SRA Safety Footwear Standards.

ST1198

Was £41.65
£33.59
Cofra

Cofra BOREAS S3 Non Metallic safety shoes by Cofra of Italy.

Water repellent full grain leather Upper with breathable leather External lining.

Cofra Boreas shoes comes with CAMBRELLE 100pr. polyamide fabric internal lining - antibacterial and breathable, abrasion resistant, it absorbs and releases the moisture.

Cold and heat insulation - footbed: made of soft and scented polyurethane, antistatic, anatomic, holed, soft and comfortable. The foot bed upper layer absorbs moisture and keeps your foot dry.

Polyurethane Nitrile rubber sole for footwear for service industry and uniforms.

Non Metallic ToeCap protection, resistant to 200 J and Non Metallic APT PLATE for Midsole protection.

Cofra BOREAS S3 Non Metallic safety shoes conforms to safety footwear EN ISO 20345:2004 - S3 standards.

ST722

Was £55.19
£47.99
Dunlop

Lightweight polyurethane, fully waterproof PU construction, traction insert to improve grip and slip resistance, resistant to oil, fat and various chemicals.

Thermally insulated and shock absorbing, shallow tread makes this boot easy to clean and hygienic.

Ideal for use in a range of agriculture and farming applications.

Safety Standard: EN ISO 20347:2012 04 FO CI SRC

Size 9 UK Only

ST5809-9

Was £59.03
£47.99
Tuffking

Tuffking 9684 black rubber fire fighters boots are used by many professional fire fighters.

This fire boot offers excellent protection required for front line fire fighting.

These fire boots can by used for many different fire kit applications.

Made from 65% natural rubber, 30% styrene butadiene rubber and 5% chloroprene rubber.

EN ISO 20345 certified.

Conforms to EN15090 F2IS and A29 UK Home Office specification

ST1158

Was £115.19
£94.42
Sioen

Sioen Largan Hip Wader with safety Wellington Boots

Safety hip-cut waders will keep you comfortable and dry and provide superior safety from punctures and impacts.

Suitable for a multitude of environments.

Very durable and abrasion resistant.

Size 9 UK only.

ST1350-43

Was £59.92
£50.35
Display per page
Display

Discounted Workwear | Reduced price

We have a wide range of discount workwear.

These are branded items of workwear, which are all fully compliant, certified, desirable products. It just happens that we may not have a full size range left, so we offer them at discount as a last chance as long as they are available. When they are gone, they're gone.

What we call Clearance workwear or low cost workwear is really the ends of lines of premium branded safety clothing, PPE and workwear.

If you are looking for "cheap work boots" or "cheap safety boots" or "cheap mens work boots" you will get the lowest priced safety boots and shoes here - from as low as £10!;

but you will get the best value, biggest discounted, premium branded safety boots in this category. Note the difference! eg We have a whopping 21% off the price of the V12 lace and zip Leopard safety boot; and we haev 28% off the Caterpillar Shelter - but only with limited sizes left. When its gone, its gone.

If you are looking for the best value gloves, you will find plenty of discounted safety gloves on this page. eg The Ansell Hyflex 11-801 Glove with 29% price saving!

We have over 1,000 lines of safety gloves - so rest assured: we have excellent value and some exceptionally low pricing for safety gloves. We have reusable gloves from about £0.40 (eg the Blackrock Barataec gripper glove) as well as many disposable gloves.



Category text fade

Sign up for our Newsletter / Receive Great Offers in your inbox